IDE to SATA small board high-speed plug and play support ATA 100/133 transmission card

IDE to SATA small board high-speed plug and play support ATA 100/133 transmission card

IDE to SATA small board high-speed plug and play support ATA 100/133 transmission card :

PATA to SATA interface adapter card could supply these IDE interface hard disk like HDD、ZIP、LS120、MO、CD-ROM or CD-Rw to be converted into SERIAL ATA interface and upgrade the transmission rate to 1.5GB/s.Through the PATA to SATA interface adapter card,we could change the built-in CD-ROM drive or CD writer into attached ones.

Specification:
Standardized Serial ATA specification,support large volume memory devices(depend on the motherboard),could be used with various machinary,easy to install
Support hot plug,plug and play.
Transmission rate 1.5GB/s
Support standardized ATAPI, ATA/133, ATA/100, ATA/66, ATA/33.EIDE.
Support standardized IDE storage devices （such as Hard Disk, DVD, DVD-RAM, CD-ROM, CD-RW...）
One 40pin IDE port
One Serial ATA port
One 4pin power connector
Converts Parallel ATA to Serial ATA
Supports ATA 100/133
Compliant with Serial ATA specification

Installation:
1. Turn off the computer power supply before install.
2. Open the computer box, plug the IDE plug of HW-629 board into IDE socket in computer motherboard(the motherboard of IDE interface).
3. Connect one bigger end of power line into spare power cord in computer box,the smaller end to be connected into HW-629 board(white socket)
4. Connect one end of data cable into SATA plug of HW-629 board, the other end to be connected into the SATA interface in SATA devices.
5. After connected ,start the computer and come into BIOS and test the device,computer mainframe could distinguish the IDE device.